911 Carrera Coupe F6-3164cc 3.2L (1984)
-
cement carpeting back over heel plate and bracket
-
puncture carpeting at mounting holes
-
install two trim screws in outboard holes and one Tenax snap bottom section in center hole (arrows)
-
mount Tenax snap bottom sections on side members at location indicated
-
install tonneau cover to rear of opening on existing snaps (Tenax and standard)
-
stretch cover forward and mark location of existing Tenax snap bottom sections which are directly behind doors on each side
-
cut 9 mm holes in tonneau cover and install upper sections of Tenax snaps (use special key supplied)
-
fasten Tenax snaps at this location