911 Carrera Coupe F6-3164cc 3.2L (1984)
Clutch Release Bearing: Adjustments
Early Linkage
NOTE: Throwout fork and throwout lever must be adjusted on the lever shaft splines to attain proper clutch lever travel.
-
Measure from the top edge of bell housing to the tip of the throwout fork and adjust to: 70 mm
-
Measure from the top edge of the bell housing to the root of the claw in the throwout lever and adjust to: 79 mm
Coat guide tube for throwout bearing with MoS2 multipurpose grease.