911 Carrera Coupe F6-3164cc 3.2L (1984)
Differential Carrier Assembly: Service and Repair
Early Production
Disassembly
-
Unscrew joint flange mounting bolt and remove joint flange from both sides.
-
Remove side cover.
-
Remove differential assembly.
-
Drive out differential pinion shaft roll pin.
-
Drive out differential pinion shaft with a mandrel and remove anchor piece.
-
Remove taped roller bearing with a puller and thrust piece P 263.
Caution: Do not interchange spacer washers and shims. Attach tags to prevent mixing up right side with left and vice versa.
-
Remove lock plates from ring gear retaining bolts. Remove bolts and take off ring gear.