911 Carrera Coupe F6-3164cc 3.2L (1984)
-
Determine thickness of plate set - distance "d" (with 2.0 mm thick outer plates, but without diaphragm springs). Clamp plate set in a vise lightly
and measure distance "d" with a sliding calipers.
Example: "d" = 76.50 mm
-
Determine distance "e" (must be 5.20 mm).
Example: "e"=c - d
"c" = 81.70 mm
"d" =-76.50 mm
______________
"e" = 5.20 mm
e2 + e2 = 5.2 mm
NOTE: If actual distance "e" is less or more than specified value, install thicker or thinner outer plates.
"e" more than 5.20 mm - install thinner plates.
"e" less than 5.20 mm - install thicker plates.
NOTE: Outer plates are available in thicknesses of 1.9 mm, 2.0 mm and 2.1 mm.
-
After finishing assembly, check slip torque with one each side differential gear held tight and driven. Clamp a flange with two bolts in a vise and
mount differential. Insert second flange with a locally made connector and turn differential with a torque wrench. A torque of 10 to 35 Nm (7 to
25 ft lb) must be reached.
