911 Carrera Coupe F6-3164cc 3.2L (1984)
Driveshaft: Service and Repair
Disassembly
-
Mount support plate P 255a in a vise. Insert input shaft and remove flange nut with special tool P 252a.
-
Press roller bearing off input shaft with thrust plates VW 401 and VW 402, and thrust disc VW 412.
-
When removing other parts, wire needle bearings races, and respective gears together for correct reinstallation.
-
Press roller bearing off input shaft with thrust tube VW 415a and press punch VW 407.
Assembly
CAUTION: Assemble all input shaft parts dry. Make sure oil does not enter between the contact surfaces.