911 Carrera Coupe F6-3164cc 3.2L (1984)
Seals and Gaskets: Service and Repair
Input Shaft Seal
With Fixed Guide Tube
NOTE: Because of the ability to interchange Porsche transmissions, it is possible to find a fixed guide tube transmission in a later model.
Removal
-
Remove transaxle and detach transmission from engine.
-
Screw puller P 386 firmly into the oil seal.
-
Pull oil seal out by turning the hex. bolt in the puller.
NOTE: If the (garter) spring should slide off during removal of the seal, pull it off the input shaft with the aid of a wire hook.
INSTALLATION
-
Push installation sleeve P 382 onto the input shaft splines.
-
Lightly oil the sealing lip of the oil seal and push the seal onto the installation sleeve.
