911 Carrera Coupe (996) F6-3.6L (2002)
1. Unscrew the adjusting element -2- in the direction of the arrow -Y- until the foam coating -3- of the A-pillar support sections on the left and right -
A, B- are pressed against the cowl panel frame trim.
2. Screw the lock nut -1- in the direction of the arrow -X- as tar as it will go against the adjusting element -2- and lock it against the adjusting element
-2-.
Assembly of Rear Trim, Floor Covering and Closure Caps
No. 1 - 2