911 Carrera Coupe (996) F6-3.6L (2002)
/f6-3.6l/Page-511005.png)
7
Loosen coolant pump
Undo the seven Torx screws on the coolant pump with a T30 wrench. Observe the different lengths of the screws. The two lighter screws are
longer.
8
Remove coolant pump
Lift off coolant pump and pull out towards the rear through the opening in the support plate. The coolant pump must be slightly tilted to do this.
The impeller must not be damaged during this procedure.
Installing coolant pump - GT3
