911 Carrera Coupe (996) F6-3.6L (2002)
/f6-3.6l/Page-213015.png)
25. Install generator. Fasten B+ wire to the generator. Make sure that the mounting position is correct in the upper cable guide. Push plug connection
on the generator and press in. The plug must engage audibly. Put the generator into the bracket.
Tightening torque: 15 Nm (11.0 ftlb.)
26. Position the right fastening screw -C-. Position the left generator fastening screw -A- in the direction of travel. Install deflection roller -B- under
the generator and tighten. Tighten the right and left fastening screws of the generator.
Tightening torque for all three screws: 46 Nm (34 ftlb.)
27. Mount the belt pulley of the hydraulic pump with the fitted drive belt of the hydraulic pump. Screw in three hexagon-head bolts by hand.
NOTE: The hexagon-head screws can be fastened after tensioning the drive belt.
