911 Carrera Coupe (996) F6-3.6L (2002)
28. Fit drive belt. To do this, turn the tensioning lever of the tensioning roller clockwise and hold. At the same time, place the drive belt onto the drive
pulleys of the air-conditioning compressor, the idler pulley and the generator. Now slowly release the tensioning lever.
29. Place the drive belt onto the idler pulley.
Complete view of fitted drive belt.
30. Fasten the belt pulley of the hydraulic pump after tensioning the drive belt.
Tightening torque: 23 Nm (17 ftlb.)
NOTE: Check that the installation position of the drive belt on all drive pulleys is correct Raise vehicle and check the lower drive wheels. Always