911 Carrera Coupe (996) F6-3.6L (2002)
/f6-3.6l/Page-894008.png)
Tightening torque: 10 Nm (7.5 ft. lbs.).
5. Clean teeth of the drive shaft and grease with a thin coat of Olista Longtime 3 EP (only as corrosion protection).
Tightening torques
Sealing Ring For Input Shaft G96/00
Removing and installing sealing ring for input shaft
Tools
Removal
1. Remove transmission.
2. Remove the release lever for clutch.
3. Remove guide tube for release bearing.
