911 Carrera S Cabriolet (997) F6-3.8L (2007)
Oil filter cover
1.1.
Cover adjacent components with clean cloths to prevent oil from dripping onto or into them.
2. Carefully remove the oil filter cover -2- and wipe off residual oil with a cloth -1-.
2.1.
Lever off the old O-ring -3- on the filter cover using a plastic spatula.
2.2.
Pull the filter element -4- out of the housing using a cloth and wrap it in the cloth.
Oil filter cover and filter element
3. Clean oil filter cover thoroughly inside and out.
3.1.
Fit new O-ring and grease lightly with Kluber Syntheso Glep (Part No. 000.043.204.68).
4. Clean the oil-filter housing with a clean cloth.
5. Fit new filter element -arrow- - it can be fitted on either side.
Oil-filter housing
6. Screw in the oil filter cover and tighten to the specified torque.