911 GT2 (996) F6-3.6L Turbo (2003)
Oil Pressure Sender: Service and Repair
Removing and Installing Oil Pressure Sender
Removal
1. Undo fastening screw M6 x 34 on the air cleaner housing.
2. Undo hose clamp between the air cleaner housing and intake manifold.
3. Tilt the complete air cleaner housing 90° upward and remove to the rear.
4. Pull off the connecting hoses between the charge air coolers and the pressure pipe. To do this, unclip the locking clips with a screwdriver. Then
return the locking clips to installation position. Additionally undo a fastening screw on the right-hand pressure pipe side.