911 GT2 (996) F6-3.6L Turbo (2003)
/f6-3.6l_turbo/Page-287002.png)
5. Undo pressure pipe -middle- by removing the spring clip -5-, hose clamp -3-, hexagon-head bolts -1 & 2- and electrical plug -4-.
6. Pull off the electrical plug. Undo the fastening screws and remove the throttle body.
7. Remove oil temperature sensor.
8. Remove plug (wrench size 19). Undo oil pressure sender. Important: always counter with a second wrench (wrench size 22) when doing so. Pull
off the electrical plug and unscrew the sender.
Installation
