911 GT2 (996) F6-3.6L Turbo (2003)
/f6-3.6l_turbo/Page-158004.png)
Coolant hose can pop off
-
Check whether the coolant hose fitting is securely seated.
-
Never treat hose connections with a lubricant such as Vaseline or spray oil.
10. Check whether the locking spring at the radiator flange is properly seated. The locking spring must be positioned between the two integral guides.
11. After fitting the Y-type coolant distributor, additionally check the position of the locking springs and whether the coolant drain cocks are correctly
engaged. The bows of the locking springs must always point up.
12. In order to check proper engagement, manually turn the flange of the drain cocks counterclockwise and clockwise. There must be approx. 1 mm
play in both directions.
Turn drain cock counterclockwise
