911 GT2 (996) F6-3.6L Turbo (2003)
Internal amplifier (optional, depending on the equipment)
Tuner
Single CD
Navigation (optional/rack)
VOCS (voice control system) (optional/Insertion)
Wake-up and diagnosis distribution breakage line control
Controller Area Network (CAN) Comfort
MOST switch
External:
External amplifier (optional, Harman or BOSE)
Telephone/Telematics (optional)
CD changer (CDC), (optional)
The PCM2 consists of at least two but a maximum of four MOST nodes, (Gateway, MMI and Navigation and VOCS (optional)), which communicate
with each other via the electronic MOST. Data outside the PCM2 is transferred via the optical MOST.
Single CD
The CD player is part of the PCM2. It is used to update the navigation system.
Input Signals
The following queries can be run using this menu item:
-
Tuner parameter
-
Registry startup status
-
Internal ring startup status
-
External ring startup status
NOTE: Deactivate the 'automatic traffic announcement' before performing the diagnosis on the PCM2. If this is not done, the diagnosis will abort.
Menu Item
Function
-
Tuner parameter
Under this menu item, it is possible to check the electrical and optical MOST during troubleshooting.
-
Connect and start the Porsche System Tester II No. 9588 and switch on the ignition.
-
Select vehicle type 911 (996) and control module PCM2-GW and press the >> key.
-
Select the Input signals menu item and press the >> key.
-
Select the "Parameter tuner" menu item using the > key and press the >>key.
-
Read out values from the display field.
-
Registry startup status
Using this menu item, you can read out the installation list.
-
Connect and start the Porsche System Tester II No. 9588 and switch on the ignition.
-
Select vehicle type 911 (996) and control module PCM2-GW and press the >> key.
-
Select Input signals and press the >> key.
-
Select the "Registry startup status" menu item using the > key and press the >> key.
-
Read out values from the display field.
-
Internal ring startup
status
Under this menu item, it is possible to check the electrical MOST during troubleshooting.
-
Connect and start the Porsche System Tester II No. 9588 and switch on the ignition.
-
Select vehicle type 911 (996) and control module PCM2-GW and press the >> key.
-
Select the Input signals menu item and press the >> key.
-
Select the "Internal ring startup status" menu item using the > key and press the >>key.
-
Read out values from the display field.
-
External ring
startup status
Under this menu item, it is possible to check the optical MOST during troubleshooting.
-
Connect and start the Porsche System Tester II No. 9588 and switch on the ignition.
-
Select vehicle type 911 (996) and control module PCM2-GW and press the >> key.
-
Select the Input signals menu item and press the >> key.
-
Select the "External ring startup status" menu item using the > key and press the >> key.
-
Read out values from the display field.
Drive Links