911 GT2 (996) F6-3.6L Turbo (2003)
-
Display colour black
Using this menu item, you can read out the current date of the PCM2.
-
Connect and start the Porsche System Tester II No. 9588 and switch on the ignition.
-
Select '911 Turbo (996)' in the vehicle type menu and confirm with the ->| key.
-
Select 'PCM' in the control modules selection and confirm with the >> key.
-
Select 'PCM2-MMI' in the 911 Turbo (996) function selection and confirm with the >> key.
-
Select 'Drive links' in the PCM2-MMI menu and press the >> key.
-
Select "display colour black" in the PCM2-MMI drive links menu with the > key and confirm with the F8 key.
-
The display must indicate the respective colour.
Proceed in the same way with the following tests.
-
Display colour "colour bar."
-
Display colour blue.
-
Display colour red.
-
Display colour green.
-
Display colour white.
-
Set default values.
Using this menu item, you can read out the current time of the PCM2.
-
Connect and start the Porsche System Tester II No. 9588 and switch on the ignition.
-
Select '911 Turbo (996)' in the vehicle type menu and confirm with the ->| key.
-
Select 'PCM' in the control modules selection and confirm with the >> key.
-
Select 'PCM2-MMI' in the 911 Turbo (996) function selection and confirm with the >> key.
-
Select drive links menu item and confirm with the >> key.
-
Select "Set default values" in the PCM2-MMI drive links menu with the > key and confirm with the >> key.
-
Read out values from the display field.
-
Distribution breakage
diagnosis
Using this menu item, you can read out the current time zone of the PCM2.
-
Connect and start the Porsche System Tester II No. 9588 and switch on the ignition.
-
Select '911 Turbo (996)' in the vehicle type menu and confirm with the ->| key.
-
Select 'PCM' in the control modules selection and confirm with the >> key.
-
Select 'PCM2-MMI' in the 911 Turbo (996) function selection and confirm with the >> key.
-
Select drive links menu item and confirm with the >> key.
-
Select "Distribution breakage diagnosis" in the PCM2-MMI drive links menu with the > key and confirm with the >>
key.
-
Read out values from the display field.
-
Distribution breakage
line diagnosis
Under this menu item, it is possible to check the electrical and optical MOST during troubleshooting.
-
Connect and start the Porsche System Tester II No. 9588 and switch on the ignition.
-
Select '911 Turbo (996)' in the vehicle type menu and confirm with the ->| key.
-
Select 'PCM2-MMI' in the 911 Turbo (996) function selection and confirm with the >> key.
-
Select drive links menu item and confirm with the >> key.
-
Select "Distribution breakage line diagnosis" in the PCM2-MMI drive links menu with the > key and confirm with
the >> key.
-
Read out values from the display field.
Control Module PCM2 (Head Unit).
The PCM2 control module (head unit) includes the following components:
Internal:
PCM2 gateway
PCM2 Man Machine Interface (MMI)
Internal amplifier (optional, depending on the equipment)
Tuner
Single CD
Navigation (optional/rack)
VOCS (voice control system) (optional/insertion)
Wake-up and diagnosis distribution line control
Controller Area Network (CAN) Comfort
MOST switch
External: