911 SC Cabriolet F6-2994cc 3.0L SOHC (1983)
Interior Moulding / Trim: All Technical Service Bulletins
Convertible Top - Problems With Tonneau Cover Snaps
Subject
Tonneau Cover
Part Identifier
N/A
Applies To
911 SC CABRIOLET
1983
Group
61
Key Points
Modification of tonneau cover snaps to "Tenax Button"
version
C
Number
84-01
January 12, 1984
In case of complaint about tonneau cover snaps, the following modification can be made:
Parts required
QTY PART NO.
DESCRIPTION
8
999 591 599 02
Tenax - Button
6
999 591 597 02
Tenax - Button Base 10 mm
2
999 591 598 02
Tenax - Button Base 16 mm
Work sequence
-
with side cutters, carefully remove snaps from left and right sides of tonneau cover at positions 1 through 4
-
enlarge existing holes in fabric to 9 mm diameter with a leather or gasket punch
-
install Tenax buttons (2 pieces) in cover
-
unscrew existing snap bases from corresponding positions on vehicle
-
enlarge existing holes to 3.5 mm diameter