911 SC Cabriolet F6-2994cc 3.0L SOHC (1983)
Fuel Supply Line: Service and Repair
REPLACING PLASTIC FUEL LINES
Special Tool - P 385 - Installer
The mixture control unit, control pressure regulator for throttle valve position and control pressure regulator for warm running compensation
replacements are furnished with plastic fuel lines attached. Defective plastic fuel lines can be replaced individually.
1. Using a soldering iron, heat defective fuel line in the connector area and pull the line off.
2. Mount replacement part in a vise with soft jaw protectors.
3. Mount fuel line in special tool P 385, allowing push on section to protrude from the tool.
4. Push dry fuel line onto the connector.
Note: Make sure that line is properly positioned.
