911 SC Cabriolet F6-2994cc 3.0L SOHC (1983)
Case: Service and Repair
Oil Pressure Lines
NOTE: Because of the ability to interchange Porsche transmissions, it is possible to find an oil pump equipped transmission in a later model.
Removal
-
Remove pressure line retaining bolt from gear housing and pull pressure line out.
-
Remove retaining bolt of pressure line (spray nozzle for ring and pinion gears) from differential housing and pull the pressure line out.
Installation
-
Install new 0-rings and oil lightly.
^
Tighten retaining bolts to: 8-9 Nm (5.9-6.6 ft lb)