911 Targa (996) F6-3.6L (2004)
2. Removing tension bow seal
Unscrew T25 -2- Torx screws on left and right sides from the tension bow seal and pull out of the groove of the tension bow.
3. Removing convertible-top covering at the tension bow
a. Remove seal from the groove of the tension bow in -direction of arrow A-.
b. Detach convertible-top covering from the groove in -direction of arrow B-.
4. Removing tension cable on convertible-top covering
Unscrew the Torx screw T25 -4- from the tension cable eyelet -3-.
5. Removing seals and retaining bracket at sides of roof frame
The seal on the roof frame consists of two parts.
a. Pull the lower seal -5- out of the profile of the retaining strip -7-.
b. On the upper seal -6- with the retaining rail -7-, unscrew the Torx screws T15 -8- and remove the seal -6- and the retaining rail -7- from the
roof frame.