911 Targa (996) F6-3.6L (2004)
/f6-3.6l/Page-1057003.png)
6. Removing retaining rail and convertible-top seal on roof frame 1
a. Unscrew and remove the Torx screws T25 -9- from the retaining rail -10-
b. Unscrew the Torx screw T25 -11- from the convertible top seal -12-.
c. Pull left and right convertible top seal -12- out of the roof frame 1 towards the front in -direction of arrow-.
7. Removing convertible-top covering at sides of roof frame 1
Unscrew the fastening screws -13- from the roof frame -15-, lift the shaped sheetmetal part -14- with convertible-top covering.
8. Removing convertible-top covering at front on roof frame 1.
Detach the convertible-top covering at front on roof frame 1 and lay it down to the rear in -direction of arrow-.
9. Removing fastening strap at the main bow
Removing wedge.
a. Unscrew fastening screws -arrow A-.
b. Unscrew fastening screw -B- from the shaped sheetmetal part on the main bow from behind.
c. Pull the connection of the fastening strap off the shaped sheetmetal part.
