911 Targa (996) F6-3.6L (2004)
10. Removing holding strap of the convertible-top covering
a. Press out fastening clip from roof frame 3 on the inner right. On the left side, press the fastening clip of the wiring harness out of roof frame 3.
11. Removing convertible-top covering at the corner bow
a. Undo the bond of the inner cloth covering -inset A- around the corner bow.
b. Fold the convertible-top covering forwards to the roof frame.
c. Pull seal -arrow B- out of the groove of the corner bow and disengage the covering strip of the convertible-top covering in downward
direction.
12. Removing convertible-top covering at the main bow
a. Pull the tightening strip of the convertible-top covering -16- from the groove of the main bow -17-. Remove convertible-top covering from the
vehicle.
Installing the convertible-top covering
All pins and screw joints must be checked for tightness before the convertible-top covering is installed.
The tension strap and the bracing strap must be replaced before fitting the convertible-top covering.