911 Targa (996) F6-3.6L (2004)
Convertible Top Frame: Service and Repair
Replacing Convertible-top Frame
Assembling convertible-top frame
Removal tool for removing retaining clips-7-
1. Installing convertible-top support
NOTE: Ensure that the assembly aids are seated firmly. The assembly aids must be recalibrated after removal.
Position convertible-top support -1- on the assembly aids and screw on with the fastening screws -3- or fastening nut -2-.
Tightening torque: 23 Nm (17 ftlb.)
2. Installing roof frame 2
NOTE: Use assembly grease when fitting the pins.
a. Insert bushing -4- 10x12x15 into the bore on the outer side of roof frame 2 -5-.