911 Targa (996) F6-3.6L (2004)
b. Position roof frame 2 -5- on the convertible-top support -1- and connect with pin -6-. Secure the pin -6- with the retaining clip -7- SLB 10.
3. Installing roof frame 3
NOTE: Use assembly grease when fitting the pins.
a. Insert bushing -4- 10x12x15 into the bore on the inner side of roof frame 3 -8-.
b. Position roof frame 3 -8- on the convertible-top support -1- and connect with pin -9-. Secure the pin -7- SLB 10 with the retaining clip -9-.
4. Installing roof frame 1
NOTE: Use assembly grease when fitting the pins.
a. Insert bushing -10- 8x10x5.5 into the bore on the outer and inner side of roof frame 2 -5- and roof frame 3 -8-.
b. Position roof frame 2 -5- and roof frame 3 -8- on roof frame 1 -11- and connect with the pin -12- and -13-. Secure the pin -7- SLB 10 with the
retaining clip -12, 13-.
5. Installing main bow
a. Position main bow -14- on convertible-top support -1-.
b. Position square hole washer -15- and washer -16- on the main bow. Secure the main bow -1- with the fastening screw -17-. Coat the fastening
screw -17- with Loctite 270 and screw in.
Tightening torque: 9 Nm (7.0 ftlb.)
6. Installing corner bow
a. Insert bushing -4- 10x12x15 into the bore of the corner bow -18-.
b. Insert corner bow -18- on the convertible-top support -1- and insert the anti-spread lock -19-. Secure the anti-spread lock with the retaining pin.
7. Installing tension bow
a. Insert bushing -20- into the bore of the main bow -14-.
b. Position tension bow -21- on the main bow and press in the anti-spread lock -19-. Secure the anti-spread lock with the retaining pin.