911 Targa (996) F6-3.6L (2004)
/f6-3.6l/Page-1088002.png)
6. Installing frame for sliding roof cover
7. Installing electric motor for sun blind
8. Installing lid hinge
Position lid hinge -4- on roof module frame and tighten with fastening nuts -5-.
9. Installing seal for cover of rear window
Push seal -6- all the way round the flange of the roof module.
10. Installing seal for the centre joint
Insert seal for the centre joint -7- into the module frame in -direction of arrow-. The seal must connect on the left and right so that it is flush.
