911 Targa (996) F6-3.6L (2004)
-
The compression springs of the auxiliary chain tensioners should be relieved after measurement. Unscrew thrust screw (wrench size 19 mm).
Allocation of chain tensioners
Installation position of the chain tensioners (engine in installed position)
Chain tensioner on the crankcase
Chain tensioner on cylinder bank 1 - 3
Chain tensioner on cylinder bank 4 - 6
10. Fit caps (6 ea.) for camshaft bores.
Installation
1. Clean receiving bore; remove any silicone material emerging. Manually fit new cap dry and press in as far as it will go.