911 Targa (996) F6-3.6L (2004)
2.2.
Detach oil filler neck. Undo hose clamp on throttle body and pull plug off the hot film mass air flow meter. Unclip wire on air cleaner
housing and remove air cleaner assembly.
3. Remove right rear wheel.
4. Pull off caps of camshaft bores (6 ea.) using the shop-made tool.
Drawing shows closure cap on cylinder head 1 - 3 (flywheel side)
5. Undo ground strap between engine and body. Undo the strap at the engine (cylinder head, near cylinder 6).
Checking camshafts of cylinder bank 1 - 3