911 Targa (996) F6-3.6L (2004)
/f6-3.6l/Page-244011.png)
7.1.
Undo clamping sleeve and remove rear muffler.
8. Remove holder for rear muffler.
8.1.
Undo upper hexagon-head bolts using a flexible-head socket wrench (wrench size 13). Detach holder.
9. Remove shield of cylinder head cover.
Removing valve tappets of the cylinder bank 1- 3 - Engine installed
1. Move camshafts of cylinder bank 1 - 3 to basic position. Turn crankshaft clockwise until the bore 1 OT (top dead centre) in the belt pulley is
aligned with the fixing bore on the crankcase. Position or fix with fixing pin (short) of special tool 9595 or 9595/1.
