911 Targa (996) F6-3.6L (2004)
15. For the subsequent adjustment work on the camshaft, the pulley must be fixed at bore 1 OT (TDC) with the fixing pin special tool 9595).
16. Fasten blocking device (special tool 9612) on the cylinder head.
Special tool fitting sequence:
A - Fastening screw with star knob on cylinder head lug.
Pull back B and C when tightening.
B - Centering piece in groove of the exhaust camshaft.
Pull sword bolt (C) back when tightening.
C - Sword bolt