911 Targa (996) F6-3.6L (2004)
/f6-3.6l/Page-245013.png)
17. Allocate camshafts; to do this, turn the pre-tensioned centre piece accordingly until the sword bolt can be fixed in the bearing bore.
18. Fasten sprocket wheel. Tightening torque 14 Nm (10.5 ft. lbs.)
19. Remove blocking device.
Note;
-
The auxiliary chain tensioners must remain fitted on cylinder bank 4 - 6 for the subsequent assembly work.
20. Fit oil extraction pump
Note;
-
The oil extraction pumps on the cylinder heads are identical parts. Therefore, the installation position and direction of rotation must be correct.
Installation position of oil extraction pump at cylinder head 1 - 3 (flywheel side).
