911 Targa (996) F6-3.6L (2004)
5. Fit the side shield on the respective side of the engine. Put on and tighten the two M6 hexagon-head bolts for this purpose.
Tightening torque 10 Nm (7.5 ft. lbs.)
6. On cylinder side 4 - 6, refit the holder for the rear muffler and re-install the rear muffler Refer to, Removing and installing mufflers.
Tightening torque for M8 hexagon-head bolts 23 Nm (17 ft. lbs.)