911 Targa (996) F6-3.6L (2004)
2. Before installation, check whether the assembly tube (2) can be moved easily in the piston eye; remove burr if necessary.
16. Move piston to installation position, position the piston ring restraining strap and insert the piston.
Note;
-
Generously coat the piston, cylinder and restraining strap with engine oil before fitting the piston.
17. Use the handle of a hammer to tap the piston gently into the cylinder while firmly pressing on the edge of the restraining strap. Use protective
gloves.
Note;
-
The piston must be fitted in the cylinder carefully and with feeling. If the resistance increases, immediately interrupt the assembly process.
Reposition the piston ring restraining strap and repeat the assembly operation.