911 Targa (996) F6-3.6L (2004)
18. Centre the piston in the cylinder bore and carefully push it down with the assembly aid (special tool 9698) to the centering mandrel stop.
19. Carefully withdraw the centering mandrel and push the piston down to the stop.
20. Align piston and connecting rod again using the centering mandrel.
21. Push in piston pin as far as it will go into the piston using the pressure pin of special tool 9602.
22. Prepare piston pin circlip for fitting on the piston. It is important to pre-fit the circlip on a firm surface. The circlip must be pre-fitted only
immediately prior to fitting on the piston pin eye.