911 Targa (996) F6-3.6L (2004)
25. Move the piston pin circlip to its installation position by briefly and forcefully striking the palm of your hand against the star knob of the pressure
pin.
26. Visually inspect correct seating of the piston pin circlip, e.g. with a shop-made electric torch with mirror.
Drawing shows a torch with adjustable mirror
27. Fitting piston in cylinder 5. Advance the crankshaft clockwise until bore U5 on the belt pulley is aligned with the fixing bore on the crankcase.
Position or fix with fixing pin.
28. Perform the following assembly steps for piston installation in cylinder 5 as described from Step 14 to Step 26. A spacer sleeve (3) is additionally
required when fitting the piston pin circlip in the piston of cylinder 5.