911 Targa (996) F6-3.6L (2004)
/f6-3.6l/Page-262007.png)
29. Fitting piston in cylinder 4. Advance the crankshaft clockwise until bore U4 on the belt pulley is aligned with the fixing bore on the crankcase.
Position or fix with fixing pin.
30. Perform the following assembly steps for piston installation in cylinder 4 as described from Step 14 to Step 26.
31. Two spacer sleeves (3 + 4) are additionally required when fitting the piston pin circlip in the piston of cylinder 4.
32. Remove centering aid 9602/3.
