911 Targa (996) F6-3.6L (2004)
7. Tighten tightening nut onto the underside of the tailpipe to 23 Nm (17 ftlb.).
Removing and Installing
Removing and installing rear mufflers
Warning!
-
Danger of burns! Parts of the exhaust system can be extremely hot.
-
Do not carry out the work until the exhaust system has cooled down or wear suitable protective gloves!
1 Muffler.
2 Fastening clamp for tailpipe.
3 Tailpipe.
4 Clamping sleeve.
Removing muffler
Note! In order to avoid damage to the wheel, use the prescribed special tool (socket wrench insert) P300 to loosen and unscrew the wheel bolts.
1. Remove the rear wheel. To do this, unscrew and remove the wheel bolts.