porsche Workshop Repair Guides

Porsche Workshop Service and Repair Manuals

ABOUT US
Removing and Installing ATF Filter (As of MY 2002)|Page 929 > < Removing and Installing ATF Filter (As of MY 2002)|Page 927

911 Targa (996) F6-3.6L (2004)

Page 2
background image

NOTE:  Without ATF, the engine must not be started and the vehicle must not be towed.

3. Replace sealing ring for drain plug and tighten screw.

Tightening torque: 20 Nm (15 ftlb.)

4. Unscrew control screw -B-.

NOTE:  To undo and tighten the cap nut for the charging valve, counter with an open-ended wrench.

5. Screw off cap nut for the charging valve.
6. Screw connection hose 9507/1 -A- onto charging valve. Top up with ATF via the charging valve until surplus ATF runs out at the control screw

bore.

Removing and Installing ATF Filter (As of MY 2002)|Page 929 > < Removing and Installing ATF Filter (As of MY 2002)|Page 927