911 Targa (996) F6-3.6L (2004)
3. Pull LWL, e.g., -B- carefully in the -direction of the arrow- . If it is not possible to pull out the LWL, check again if the secondary locking is
completely released and if the primary locking is raised sufficiently.
-
Visual inspection of lockings, connector housing, and contacts for possible damage and if necessary, exchange the damaged parts.
Installing optical contacts on connector side
-
Remove the dust boot right before plugging.
-
Check the proper condition of the contact.
1. Insert the optical contact -B- in the connector until it engages audibly.
2. Lock the secondary locking -arrow- and check the optical contacts for tightness.
Removing and installing optical contacts on socket side
1. Release the spring cap on both sides and remove using the press-out tool.