911 Targa (996) F6-3.6L (2004)
Oil mist separator sealing rings
13. Remove connections to the oil separator. For this purpose, place a cloth underneath as coolant emerges from the bottom vent line. Press and
remove the connections -arrows-. Remove oil separator from the engine compartment.
Oil mist separator connections
Installing oil separator
Installing oil separator
1. Check seals of oil separator and replace if necessary. Place oil separator in the installation position and make all connections -arrows-.
Oil mist separator connections
2. Lightly coat the sealing rings to the crankcase with Optimol MP3 -arrow-. Carefully turn the oil separator and press it into the bore of the
crankcase.