911 Targa (996) F6-3.6L (2004)
Oil mist separator sealing rings
3. Fit both side fastening screws -arrows-.
Mounting of oil mist separator
4. Fit air conditioning compressor: before installing the compressor check whether the aluminum spacer sleeve -arrow- is inserted. Grease and fit
sleeve. Also guide through ground cable before installation.
Front air conditioning compressor fastening screw and sleeve
5. Fit air conditioning compressor and fasten using three M8 Torx screws (two short ones at the rear, one long one at the front). See details and
tightening torques.
6. Fit drive belt. Pay attention to operating direction of used belts. Double-check that the position of the belt on the belt pulleys is correct.