911 Targa (996) F6-3.6L (2004)
12. Pull the retainers off the injection valves -A- and pull the injection valves out of the fuel collection pipe -B-. Make sure that all O-rings are present
on the injection valves. Collect emerging fuel with a cloth.
Installing Injection Valves Of Cylinder Bank 1 - 3
NOTE: Replace O-rings of the injection valves.
1. Replace O-rings of the injection valves and press the valves into the fuel collection pipe -A-. The O-rings can be sprayed, e.g. with silicone spray,
for easier assembly. Fit the retainers -B- of the injection valves correctly (they must snap into place).
2. Push the fuel collection pipe complete with injection valves into the intake pipe and insert the two M6 x 12 hexagon-head bolts of the fuel
collection pipe into the intake pipe. Make sure that the loose wiring harness is not trapped.
3. Tighten both M6 x 12 hexagon-head bolts with the correct tightening torque.
Tightening torque 10 Nm (7.5 ftlb.)