911 Targa (996) F6-3.6L (2004)
MOST System check (ignition on.)
This check must only be carried out when the engine is not running.
Menu item
-
MOST System check (ignition on.)
Function
Using this menu item, a MOST system check can be carried out with the ignition on. The following checks are carried out automatically and their results
are displayed.
-
Gateway start-up condition is read out.
-
MOST installed components list (required and actual installed components list) is analysed.
-
Start the ring break diagnosis.
-
The results are displayed by the Porsche System Tester II 9588.
-
Connect and start the Porsche System Tester II 9588 and switch on the ignition.
-
Select 911 (996) in the Vehicle type menu and confirm with the >> key.
-
Select PCM2 in the Control modules menu and confirm with the >> key.
-
Select MOST components check in the PCM2 function selection and confirm with the >> key.
-
Select MOST system check (ignition on) in the 911 (996) PCM MOST components check function selection and confirm with the >> key.
Diagnosis, open circuit in distribution line (ignition on.)
This check must only be carried out when the engine is not running.
Menu item
-
Diagnosis, ring break diagnosis (ignition on.)
Function
The ring break diagnosis carries out the following checks:
-
Gateway start-up condition is read out.
-
MOST installed components list (required and actual installed components list) is analysed.
-
Start the ring break diagnosis.
-
The results are displayed by the Porsche System Tester II 9588.
-
Connect and start the Porsche System Tester II 9588 and switch on the ignition.
-
Select 911 (996) in the Vehicle type menu and confirm with the >> key.
-
Select PCM2 in the Control modules menu and confirm with the >> key.
-
Select MOST components check in the PCM2 function selection and confirm with the >> key.
-
Select Ring break diagnosis (top) in the 911 (996) PCM MOST components check function selection and confirm with the >> key.
-
Follow the Tester instructions.
Optical performance check
Menu item
-
Optical performance check
Function
The optical performance check allows the performance of the MOST to be checked optically. The following checks are carried out automatically:
-
MOST installed components list (required and actual installed components list) is analysed.
-
External MOST components display.
-
Carrying out the performance check.
-
The result is displayed by the tester.
-
Connect and start the Porsche System Tester II 9588 and switch on the ignition.
-
Select 911 (996) in the Vehicle type menu and confirm with the >> key.
-
Select PCM2 in the Control modules menu and confirm with the >> key.
-
Select MOST components check in the PCM2 function selection and confirm with the >> key.
-
Select Optical performance check in the 911 (996) PCM2 MOST components check function selection and confirm with the >> key.
-
Follow the Tester instructions.
Data transmission check
Menu item
-
Data transmission check