911 Targa (996) F6-3.6L (2004)
Menu item
-
Tuner parameters.
Function
Using this menu item, you can code the tuner parameters (country-specific tuner setting) for the country of registration.
-
Connect and start the Porsche System Tester II 9588 and switch on the ignition.
-
Select 911 (996) in the Vehicle type menu and confirm with the >> key.
-
Select PCM in the Control modules menu and confirm with the >> key.
-
Select PCM2 GW in the 911 (996) PCM2 function selection and confirm with the >> key.
-
Select Coding in the PCM2 GW function selection and confirm with the >> key.
-
Select Tuner parameters in the PCM2 GW Coding function selection and confirm with the >> key.
-
Select the country code for the country of registration and code with the F8 key.
Vehicle Hand-Over
Vehicle Hand-Over
The PCM2 is converted to delivery mode (low-current mode) in production. As known from other systems (alarm system, instrument cluster, roll-over
bar), the PCM2 must be activated with the Porsche System Tester II 9588.
1. Connect and start the Porsche System Tester II 9588 and switch on the ignition.
2. Select Special functions in the Vehicle type menu and press the >> key.
3. Select Vehicle hand-over in the Control modules menu and confirm with the >> key.
4. Follow the instructions of the Porsche System Tester II 9588.
Display * in the menu Control modules and menu PCM2/ CDR23 MOST component check
Different required and actual installed components lists.
When the automatic control module search is complete, the following display * appears in front of the control module description PCM2 in the Control
modules menu, as well as in the PCM2 MMI function selection in front of the entry MOST required installed components list if the Porsche System
Tester II 9588 establishes a difference between the required and actual installed components list and there is no fault code in one of the fault memories of
the MOST control modules.
If there is a fault code present in one of the MOST control modules, the display * is only shown in the PCM2 MMI function selection in front of the line
MOST required installed components list.
If there is a display in the menu Control module, an existing fault code has priority and a # is set.
Country-specific tuner settings
The following country-specific tuner settings can be coded:
-
Europe.
-
North America.
-
South America.
-
Australia.
-
Asia.
-
South Africa.
-
Japan.
Coding country-specific tuner settings
1. Connect and start the Porsche System Tester II 9588 and switch on the ignition.
2. Select 911 (996) in the Vehicle type menu and confirm with the >> key.
3. Select PCM in the Control modules menu and confirm with the >> key.
4. Select PCM2 GW in the 911 (996) PCM2 function selection and confirm with the >> key.
5. Select Coding in the 911 (996) PCM2 GW function selection and confirm with the >> key.
6. Select Tuner parameters in the PCM2 GW coding function selection and confirm with the >> key.
7. Take the country-specific code as it appears in the table, enter it in the form and code with the F8 key.
Coding PCM2
1. Connect and start the Porsche System Tester II 9588 and switch on the ignition.
2. Select 911 (996) in the Vehicle type menu and confirm with the >> key.
3. Select PCM in the Control modules menu and confirm with the >> key.
4. Select PCM2 GW in the PCM2 function selection and confirm with the >> key.
5. Select Coding in the PCM2 GW function selection and confirm with the >> key.
6. Select PCM2 code in the PCM2 GW coding and confirm with the >> key.