911 Targa (996) F6-3.6L (2004)
/f6-3.6l/Page-81001.png)
Yaw Rate Sensor: Service and Repair
Removing and installing rate-of-turn sensor - PSM 5.7
The transverse acceleration sensor is integrated in the rate-of-turn sensor as of PSM 5.7 (as of the 2000 model).
Removal
Caution! The rate-of-turn sensor is a micro-mechanical component and is very sensitive to impacts!
Note!
-
Perform removal and installation with the ignition switched off!
1. Move the front seats into the rear seat position.
2. Remove side-panel lining in front of the center console on the left -A- and right.
