911 Targa (996) F6-3.6L (2004)
6. Loosen fastening nuts (3 ea. M8) at spring-strut mount (arrows). Before doing this, mark the installed position of the spring strut mount (position
of the three collar nuts).
7. Pull out spring strut with wheel carrier.
8. Loosen clamped connection between spring strut/wheel carrier (arrow).
9. Pull out spring strut from wheel carrier.
Installation
Installation
1. Install in reverse order. Before installing, give the parts a visual check. Replace brake caliper fastening screws.
2. Do not grease screwed connections in Dacromet finish - aluminum color. Use correct tightening torques.