911 Targa (996) F6-3.6L (2004)
-
Tension the coil spring with the spring clamp until the piston rod is relieved.
-
To undo the connection (piston rod to spring strut mount) counter at the piston rod with special tool 9630 or a 7-mm Allen key.
Important: Never use an impact bolter to loosen or tighten the fastening nut.
-
Remove all parts from the piston rod.
Note!
^
When installing new parts, observe the allocation.
Preliminary work and notes on assembly
-
Replace nut for fastening the piston rod on the spring strut mount.
-
It is recommended to replace the coil springs only in pairs.
Note!
^
If the coil springs are exchanged, it might be necessary to use a different spring plate than before.
The following spring plates (compensation parts) are available:
Allocation of the spring plate according to the coil spring tolerance group.