911 Targa (996) F6-3.6L (2004)
/f6-3.6l/Page-762004.png)
-
Press spring plate No. 6 (compensation part) into the assembly consisting of mount No. 5 and back-up ring No. 5a and complete with the spring
strut mount No. 3.
-
Fit protective bellows on additional spring.
-
Observe the correct allocation (running gear version) when installing new springs and/or dampers.
-
Tension coil spring with spring clamp.
Distinguishing feature of coil springs and dampers
A Identification of the running gear version (spring constant/spring length) by two different coloured lines (for example, 1 x blue and 1 x white).
B Identification of the coil spring tolerance group (load group) for determination of the compensation part (spring plate) thickness.
C Colour dot (colour label) to differentiate the damper identifier.
1 white line = 3.0 mm thick compensation part.
1 green line = 6.5 mm thick compensation part.
White dot = Standard running gear RoW/USA
Green dot = Sport-type running gear RoW/USA
Assembly
