911 Targa (996) F6-3.6L (2004)
A Identification of the running gear version (spring constant/spring length) by two different colored lines (for example, 1 x brown and 1 x yellow).
B Identification of the coil spring tolerance group (load group) for determination of the compensation part (spring plate) thickness.
C Colour dot (colour label) to differentiate the damper identifier.
1 white line = 0.5 mm thick compensation part.
1 green line = 4.0 mm thick compensation part.
Brown dot = Standard running gear, RoW/USA
Green dot = Sport-type running gear, RoW
Grey dot = Sport-type running gear, USA
-
Tension coil spring with spring clamp.
-
Clamp eye of vibration damper in the vise (use jaw liners).
Assembly
-
Place pre-tensioned coil spring on the vibration damper.
-
Slide the protective tube/additional spring assembly on the piston rod.
-
Slide the washer No. 7 and stop plate No. 6 (No. 6 in correct position) as far as they will go onto the piston rod.