911 Targa (996) F6-3.6L (2004)
-
Place the spring strut mount (assembly of spring strut mount / intermediate part / spring plate) onto the piston rod so that the end of the coil spring
lies against the stop of the spring plate.
-
Place stop plate in the correct position on the spring strut mount. Screw new fastening nut onto the piston rod until approximately 1 to 2 threads
are visible above the fastening nut.
-
Position the spring strut mount for installation (correctly position spring strut mount with respect to the damper). The mounts for the right and left
sides are identical parts.